Denali Controller — CANsmart™ — BMW

• Harness the flexibility and intelligence of your BMW motorcycle's Can-Bus electrical system
• Provides Plug-and-Play installation and integrated control of up to four accessories to enable dozens of customizable settings that can be controlled right from the BMW "WonderWheel" or the CANsmart™ Accessory Manager Software
• High/Low Sync - Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch
• On/Off and Dim - Independently control two sets of lights On/Off and change intensity level (for both day and night) right from your original vehicle switches
• Modulate lights - Set auxiliary lights to modulate to increase your visibility to other motorists
• Flash to pass - Pulse your high beam switch three times and your auxiliary lights will strobe three times fast
• Cancel with turn signal - This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal
• Inverse flashing with hazards - This features flashes your auxiliary lights inversely to your hazard lights, increasing visibility during road side emergency's
• Strobe with horn - With this feature selected the CANsmart™ software will automatically strobe your auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed
• Plug & Play horn installation - Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay
• Flash pattern braking - The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady
• Deceleration activated "Smart Brake" technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate
• Switched power source - The CANsmart™ provides a universal accessory option which simply gives you clean switched 12 V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition
• Circuit function selector - The Circuit Function Selector in the CANsmart software will let you run any accessory of your choice on any of the four circuits. Click on a circuit icon to open the drop down menu and make your selection from the list of available circuit functions
• Delay time out - You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike
• On board power - The accessory circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device

Amps

30 A

Color/Finish

Black

For Make

BMW

Riding Style

Street

Units

Each

Volts

12 V

Shipping weight

1.53 lb

Package size

7.6 × 4.9 × 3.9 in

Country of origin

ZA

Salto part #

2120-1378

Denali part #

DNL.WHS.11602

UPC

810005872300

In stock at a distributor warehouse. Ships in 2–4 business days by ground.

Ground shipping is $14.95, free on orders over $150. Stock is re-checked with the warehouse before your card is charged.

Is it in stock?

Yes — the distributor shows it on a shelf at a regional warehouse right now. We check again the moment you order, before anything is charged.

How fast will it get to me?

Usually 2–4 business days by ground.

Will it fit my machine?

The distributor lists it for the models in the Fitment section above. Not sure about your trim or year? Call the counter at 801-361-3010 and we’ll check it with you.

Is this genuine Denali?

Yes. It ships new from the same distributors the big online stores buy from — Denali part #DNL.WHS.11602.