Carli 2023+ Ford F250/350 4x4 Radius Arm Drop Brackets - 3.5in Lift

Designed for perfect fitment on the updated 2023+ Ford Superduty trucks, these drops will correct geometry with 3.5" lifts.

Carli 23+ ford f250/350 4x4 radius arm drop brackets - 3.5" lift

• When lifting the front of the Super Duty 3 – 3.5″, the factory caster is reduced by approximately 1.5°. For the 2020-23 Super Duty, we provide a 2° caster shim which is enough to restore this caster and add a touch more – unfortunately, this “touch more” is rarely enough for proper tracking. This leaves us recommending our Adjustable Radius Arms proven to add an additional 2.5° of caster (when maxed). Combining the Carli Arms and 2° shims results in a Super Duty on 37″ tires that holds a lane, and returns to center after a turn, better than a stock truck.
• Enter the 2024 Super Duty – Ford made ONE change to the platform… They added an outer axle-mounted guard to prevent debris from entering the outside axle tube. The issue is in the functionality of the ball-joint mounted caster shims we provide in our 05-23 Super Duty Systems to correct the caster. These shims don’t affect the axial position of the axle, but rotate the knuckle/upper ball joint position rearward relative to the axle’s outer “c” to increase caster.
• The 2023+ Super Duty introduced some new challenges, specifically pertaining to caster. The steering assist and Ford’s 1° – 3.6° allowable caster range seems to work alright for those equipped with stock, relatively low-mileage Super Duties but, once a lift or oversized tire enters the equation, the handling at this low caster specification leaves us wanting.
• Given the tight proximity of this debris shield to the axle tube, any caster shim over 1° will cause contact. Unfortunately, these trucks come with low caster from the factory compounded by the loss of caster from lifting the truck (radius arms tilt the axle forward – reducing caster – as the axle travels away from the frame); we had to figure out a solution.
• The Carli Radius Arm Drops for 3.5" lifts were designed to fix this problem once and for all. The bolt-on design is a simple and easy installation that will provide the necessary increase in caster at a lower price point than installing the full Carli Radius Arm System and are compatible with stock OR the Carli Adjustable arms.
• Fabricated 1/4" steel construction ensures maximum strength.
• Drops pivot point for ideal radius arm angle on 3.5" lifts.
• Complete bolt-on installation with no welding required.
• Durable black powdercoat finish.

Shipping weight

43.1 lb

Package size

26 × 13.3 × 8.3 in

Salto part #

cliCS-FRAD-LVL-2325

Carli part #

CS-FRAD-LVL-2325

Special order from the distributor network. We email the ship date when you order.

Ground shipping is $14.95, free on orders over $150. Stock is re-checked with the warehouse before your card is charged.

Is it in stock?

It isn’t on a shelf at our primary warehouses right now, but it’s orderable through our extended distributor network. We confirm timing by email when you order, before anything is charged.

How fast will it get to me?

We confirm the ship date when you order. If anything changes, you hear it from us first.

Will it fit my machine?

The distributor doesn’t publish a vehicle fitment list for this part. Call the counter at 801-361-3010 with your year, make and model and we’ll check it with you before you order.

Is this genuine Carli?

Yes. It ships new from the same distributors the big online stores buy from — Carli part #CS-FRAD-LVL-2325.